Power Ipad 3 Button Replacement

Description of work (per item)

Step 1: Turn off the tablet. We warm the touchscreen around the perimeter with a hairdryer. (temperature 200-250 degrees).

Step 2: After heating, insert between the glass and the plastic frame, in the upper right corner, a spatula and raise the touchscreen. In the resulting gap, insert a plastic mediator.

Step 3: We conduct a mediator around the perimeter of the touchscreen, thereby peeling off the touchscreen from the tablet body. Be careful in the lower left side there is a touchscreen loop, do not damage it.

Step 4: After you have peeled off the touchscreen, lift it to the left side (like a book).

Step 5: Remove the 4 screws securing the display. Lift the display to the left (like a book)

Step 6: Disconnect the display cable connector by lifting up the metal clip. Remove the display.

Step 7: Disconnect the touchscreen cable by lifting the two plastic clips up. Remove the touchscreen.

Step 8: Remove the plastic seal at the bottom of the tablet to the left of the system connector.

Step 9: Disconnect the system connector cable connector, speaker connector and wi-fi antenna coaxial cable.

Step 10: Unscrew the 2 screws securing the system connector. We remove the system connector with a loop.

Step 11: Disconnect the top cable by lifting the two plastic tabs up at the top of the motherboard.

Step 12: Unstick the stickers from the top loop.

Step 13: Disconnect all available connectors from the top loop.

Step 14: Unscrew all the screws securing the upper loop to the case.

Read more:  Ipad Lit Charging Icon And Apple

Step 15: Unscrew the 2 screws securing the main camera.

Step 16: Unscrew the 2 screws securing the headset jack.

Step 17: Remove the SIM tray.

Step 18: Turn the top loop up.

Power Ipad 3 Button Replacement

Step 19: Unstick the sticker from the connector of the SIM connector. Disconnect the connector.

Step 20: Unscrew the 3 screws securing the SIM connector to the case. We remove the sim connector.

Step 21: We remove the top loop.

Step 22: Unscrew all the screws securing the system board.

Step 23: Turn the board up. Disconnect the 3 coaxial cables from the back of the board and remove the board itself.

Step 24: Unscrew the 4 screws securing the wi-fi antenna. Carefully unstick the coaxial cable from the loop of the polyphonic speaker and remove the wi-fi antenna.

Step 25: Unscrew the screws securing the tab of the loop of the side buttons. Retrieve the tab.

Step 26: Unscrew the screw securing the bracket for the side buttons. Carefully peel off the cable of the side buttons from the case.

Step 27: Unscrew the 2 screws securing the power button. We extract the loop with the buttons entirely. To assemble the tablet, follow the instructions in reverse order.