How To Configure Asus Rt N16 Router

How To Configure Asus Rt N16 Router

The number of computers and computerized equipment filling our homes is growing. Therefore, the organization of a home local area network has not been an innovation for a long time, rather, it is already a necessity.

As a rule, the provider provides one cable connection, less often it is a connection to an urban wireless network. Naturally, the ability to get a cable for each device in a house or apartment exists, but just imagine how it will look.

An important factor is that most mobile computers, such as smartphones, netbooks, tablets, chromebooks generally can not connect to the network using a cable. The only way out of all these situations is to buy and configure a network router. The router will be able to provide the connection of absolutely any equipment through cable and wireless connections.

Router Features

There are many types of network routers. However, for organizing a home network, the not very expensive ASUS RT N16 model, which has excellent characteristics, is perfect.

Among the main ones, the differences between similar and competitive models should be highlighted:

connection support from 10 to 1000 m / bit over LAN ports with the possibility of crossover connection;

triple external antenna;

two USB ports with the ability to simultaneously connect an external hard drive and printer;

small dimensions and weight of the device (216 x 161.9 x 40.5 mm);

operating frequencies of wireless communication in the range of medium occupancy (2.4GHz. 2.5GHz);

the ability to use modern wireless standards (b, g, n) with excellent output power (15.8

19.5dBm), which will provide Wi-Fi connection of both equipment with old modules and high speeds to more high-tech devices;

support for all necessary for working with various network protocol providers (Static IP, PPPoE (MPPE supported), PPTP, L2TP);

the possibility of encryption, both wireless and outgoing, as well as data logging for troubleshooting;

protection of each connection by filtering packets with a built-in powerful firewall.

Simply put, the router implements all the necessary functions and support for all known connection and encryption protocols. Therefore, if you configure ASUS RT N16 correctly, it will provide a continuous and high-quality connection to any provider.


Before you begin to configure the router, you must ensure that at least one computer is connected to it via the internal LAN. It is also advisable that the provider cable is already connected, since this is the only way to check the settings are correct. There is nothing complicated in connecting a router, and it is completely similar to other devices.

The connector for connecting the cable coming from the side of the provider is most often signed as WAN (wide area network) or Internet and is marked in blue on some models. As for the ports for creating a home network, they are positioned as LAN (local) and can be yellow (usually four of them).

In order to start the configuration, we connect the cable coming from the provider to the WAN port and connect one of the home computers via a local area network (LAN port) or Wi-Fi (wireless). It is worth knowing that in unconfigured Asus routers, the wireless connection will be called “Default”. The password for the connection is indicated on the back of the ASUS RT N16, and may also be contained in the documentation or on the box.

Web Login

Each network device has its own firmware, which is called firmware. It depends on how the router configuration interface will look, as well as the initial settings for the local network.

If ASUS RT N16 was recently purchased and the firmware on it was factory, then the device’s IP address will be, respectively, it will be assigned to your computer as a gateway to the Internet and as a DNS server for receiving and decrypting domain names.

By typing the address of the router in any browser, you will need to enter authorization data to change the settings. These data can also be viewed on the back of the device or on the box.

Most often, for the initial entrance to the settings, verification data is used, such as username (login) and password (password):

Depending on the model, the password “1234” or an empty field can sometimes be used (you just need to press “Enter”).

Configure various connection types

After identification, a quick setup window will appear. To go to detailed and professional parameters, click the "Advanced" button.

If all settings for accessing the network are issued by the provider, then you can not change anything. In this case, your router will receive the settings automatically (via DHCP). However, this type of connection is rarely used by providers.

Other types of connection are in the WAN port settings. You can change the connection type from dynamic (when IP settings can change) to static (settings are specified manually, but no additional connections are required).

If an additional connection is necessary, then the following possible protocol options exist, the individual settings of which can be checked with the provider:

To connect a PPTP type, you need to specify the following data:

login (username) of the connection;

select protocol encryption options;

enter the dns of the provider if the server name is indicated;

if you need a static WAN port connection, set ip, mask, gateway;

when authorizing on the server using the MAC address, enter the data;

if necessary, change the size of the transmitted packets;

server name or ip address.

You may also like

login (username) of the connection;

enter the dns of the provider if the server name for the connection is indicated and dns is not automatically issued;

if you need a static WAN port connection, set ip, mask, gateway;

when authorizing on the server using the MAC address, enter the data;

server name or ip address.

To connect a PPoE type, you need to specify the following data:

login (username) of the connection;

enter the dns of the provider if the server name is indicated;

if you need a static WAN port connection, set ip, mask, gateway;

when authorizing on the server using the MAC address, enter the data;

set the name of the access concentrator (in the form of ip or server name);

The name of the service that receives authorization rights.

Depending on the provider, the connection can be made with common static or dynamic settings for each of these protocols. However, each of them is different from the other and requires slightly different data for authorization on the server, which provides further access to the Internet.

For example, if you are setting up an ASUS RT N16 router for Beeline, then a connection of the L2TP type is used. You need to select the appropriate type for the WAN connection. After that, you will need to specify the local settings (if necessary) for accessing the network, as well as the authentication settings on the server (login, password and name or server IP).

In the case when the provider provides a PPoE connection, most often the settings are issued by the DHCP server, but authorization on it is necessary. Therefore, you do not need to cancel the automatic receipt of IP for the WAN port, but you must specify a username and password so that the server passes you further (it is widely used in networks with free access to the local, but temporary or resource restriction to the global network).

Turn on and configure Wi-Fi

Configuring and managing wireless communication with the router are in the corresponding tab.

To connect to Wi-Fi, do the following:

Assign a SSID for a Wi-Fi network. This is done in order to recognize your network among hundreds of others, if you live in an apartment building;

select an encryption type and user verification method;

Assign a password (at least 8 characters)

if you need to change the width and channel number (it is recommended to change the number when the wi-fi network is very busy and the connection is interrupted);

if necessary, you can hide the SSID (network name), but this is not recommended, since there may be problems connecting some devices.

It is recommended to use the original name in order to avoid conflicts in the future. If at home, at work and in a cafe there will be routers with the name ASUS, you will have to delete the connection all the time and create it again, or delve into its settings to change the authorization data.

It is also better to set a password so that neighbors cannot use your Wi-Fi connection. It is important to set the best encryption settings and a complex password, since there are many programs for hacking. Hacking your home network is fraught not only with unauthorized traffic, but also with the ability to intercept data and make router settings.

If all home devices are equipped with modern wireless modules, you can specify that only N format communications be used. A router does not need to fill up memory with support for other connections if they are not needed.

After making changes, it is important not to forget to save the settings by clicking the "Apply" button.

IPTV setup on ASUS RT N16 router

The IPTV function is becoming more popular every day. This option allows you to watch TV channels using a local or global network. In the first case, the provider provides this service, in the second. special Internet services.

To view you will need a special program or application for a mobile computer. The names and installation process may vary depending on the operating system you are using.

In order for ASUS RT N16 to transmit multithreaded video normally, with the help of which the IPTV broadcast function is implemented, it is necessary to include the following items in the routing settings:

Use DHCP routes

enable multicast routing.

You should be aware that using Multicast technology transmission greatly clogs the network channel, therefore it is recommended to limit it to a third of the total connection speed. Otherwise, data transfer over the internal local and wireless network may become unavailable.

Since the provider provides widescreen IPTV television, and the connection speed is 100 Mbps, we select the average value of 36. You can experiment with the option, but be careful if connecting to the router is possible only via a wireless network.


If an error was made when entering the settings, and the question arose. how to reset the parameters, then you can always reset them using the corresponding settings function of the router.

To do this, you need:

go to the “Administration” tab;

go to the settings management item;

click the “Restore” button.

If you changed the administrator password and then forgot it, and now you can’t access the settings, hold down the “Reset” button and hold it for 5 seconds, then reboot the device. After rebooting, the settings will be reset.

Factory Password Change

In order to ensure security of access to the settings of the router, you need to change the password to a more complex one.

To do this, you need:

open the System tab;

select "Administration";

enter authorization data that were used before, as well as a new login and password.

It is important not to forget the entered authorization data, otherwise you will not be able to make changes or check the settings of ASUS RT N16 until you completely reset them using the special "Reset" button.

Firmware update

If the factory firmware of the device does not contain certain functions whose implementation you need, you need to try installing another firmware. First of all, you can try the regular update and use the latest version for your device from the official site.

But if you want to do something that official firmware cannot provide, for example, organize a secure VPN tunnel inside your local network, or even give access from the world to use your PPTP connection (if you have an external IP), you will need firmware from a third-party developer.

For example, for the functions described above, you can use merlin or a more modern official firmware. When choosing a site to download, try to use official resources. Also, do not forget about the revision of your router when choosing the firmware.

In order to update the firmware it is necessary:

go to the "Administration" item in the settings of the router;

select the tab “Firmware Update”;

indicate the location of the file with the previously downloaded new firmware and press the corresponding button.

The ASUS RT N16 router is perfect for organizing a home network or can be used in production with a small number of local connections. Due to its high functionality and many supported standards, it can be called the best in its price category.