Faced the question: what if the Honor or Huawei phone fell into the water? Each user has encountered a problem. The main nuisance is that water flows into all entrances. This provokes further damage. Most models stop working. Developers recommend taking precautions. Some phones have a waterproof case. Such models are more expensive than others. However, they work even in contact with water. Try also a waterproof case. It is inexpensive.
What to do if Honor or Huawei fell into the water
Immediately after getting into the water, the mobile phone turns off. Some models stop working forever. After getting liquid, the performance of the gadget is reduced by half. Users should expect that there are few guarantees for salvation. Use the following recommendations to correct the situation. Short steps will save a drowned gadget.
Remove smartphone from water, disconnect and disassemble
Quickly remove the smartphone from the water, unplug and disassemble it into its components. Any gadget has slots and headphone inputs. Through them, water enters the phone and gradually degrades the work. The most deplorable option is a short circuit. Therefore, we take out the gadget and dry each element. Take care of the battery, sim card and external memory. Wipe the battery with a towel. Otherwise, humidity will negatively affect the charging of the device.
If the phone is not separable
Modern mobiles do not understand. In such gadgets, you cannot remove the battery or any other parts. Take note of the old, proven way. Pour plain rice into the box and put the gadget inside. It absorbs moisture well and dries the mobile. A couple of hours and the phone will work as before. Silica gel also serves as a moisture-absorbing component. Bags with such a substance are often put in boxes with new shoes.
What should not be done after water gets into the phone?
In case the liquid gets into the gadget, you absolutely can not do it:
- Launch the device immediately. Wait for it to dry completely. In no case, do not connect the mobile to the power supply system.
- Not sure about your competency? Do not disassemble the gadget. This will cause an irreparable failure. Moisture will spread further on the device.
- Use mobile when the screen does not work. In this case, contact a service center for help. Competent specialists will solve any damage.
Video: Huawei P20 Waterproof Or Not
The first way is to use an ordinary towel. Wipe the gadget well and wipe the batteries, SIM card slot and the inside. Do not take paper napkins or towels. Despite the fact that they absorb well, they break up into small pellets. They fall into slots and passages, which impairs work. Take a rag towel and dry clean the surface. Even one minimal drop can cause a malfunction.
Hair dryer or vacuum cleaner
Most users immediately grab onto a hair dryer or vacuum cleaner. Blowing out the appliance is not recommended. The hair dryer blows hot air, which leads to overheating of the electrical parts. Technical consultants recommend using the vacuum cleaner at minimum speed. It is needed to completely absorb drops of water. In the fight against moisture inside is absolutely powerless.
Absorbent or rice
Save a Huawei or Honor phone if you fall into the water easily using rice or silica gel. Such cereals are in every home. Fill any capacity and put your smartphone there. This will help prevent water from entering the gadget’s processor. Silica gel is small balls. In any box from under the shoes you can find a bag with such a substance. It works faster than cereals and absorbs better liquid.
What if the Honor phone falls into the water and does not turn on?
The phone fell into the water and does not turn on? Then use the services of a qualified professional. This will save the situation, and the phone will work. If you can’t take the gadget to the master, then quickly put it in a container with water-repellent components. Never connect the mobile to charging! Water acts as a conductor and may cause a short circuit.
Fell into water and vibrates
Remove the gadget and immediately remove the battery. If the phone is not separable, press the power button. Blot the device and try to wipe it as much as possible. Now proceed to drying. Use one of the above methods. Then take the gadget to a service center.
Put the phone in the hands of specialists as soon as possible. It will not be possible to disassemble and dry the board on its own. Do not have experience in similar work? Take the risk of harming the gadget even more. Visit the service center without delay.
The main problems when water gets into the smartphone
The most common liquid malfunctions are:
- the gadget turns on, but the screen does not respond;
- the phone works, but the sensor is not active;
- the icon disappears when a headset is connected;
- after activation, the device reboots for a long time;
- when turned on, the indicator lights up, but it does not turn on.
After falling into the water, the performance of the equipment decreases significantly. You may need to purchase new parts for installation.