Nokia 2700 Nokia Inscription Does Not Turn On

It happens that Nokia phones are bricked and sometimes you need to reflash the phone with official firmware in order to bring it back to life. In this guide, I will tell you how to upgrade Nokia to Windows without too much crap.

Nokia 2700 Nokia Inscription Does Not Turn On

Firmware requires Nokia Care Suite 5.0 (Softopedia, opens in a new window). Download and install it first thing.

First, get the firmware. There are several solutions.

You may also like

  • Option using Nokia Care Suite:
    1. Run Nokia Care Suite.
    2. In the main window, click "Product Support Tool for Store".
    3. In the window that opens, click "Tools / Firmware Download".
    4. In the dialog that opens, enter the product code of your phone, which looks like this: 0XXXXXX. You can find it by typing # 0000 # in the dialer. After entering the product code, click the "Check online".
    5. The program will show you the version of your firmware, size information, etc. The “Optional content files” checkbox can be unchecked so as not to download too much. Now click the "Download»And wait while the firmware is downloading.
    6. Download firmware from forum.xda-developers.com(opens in a new window). Then you need to upload the firmware files to the directory C: ProgramDataNokiaPackagesProductsRM-XXX (Nokia Care Suite 5.0 should already be installed), where XXX is the RM code (for example, RM-807), which you can find on the sticker in the battery compartment, on the side of the phone or on the box from the phone.
    7. Use NaviFirmPlus(opens in a new window), which can download official firmware from Nokia sites. Recently, Nokia has closed its servers for the masses and now, when trying to use this program, an error message pops up.

    Video: Nokia 2700 Nokia Inscription Does Not Turn On


    Now we have the firmware that is installed in the Nokia Care Suite program. we can sew.

    1. Disconnect the phone from the computer, if it was connected. Run Nokia Care Suite.
    2. In the main window, click "Product Support Tool for Store".
    3. Click "File".
    4. Click "Open product".
    5. Choose the one that matches your phone, RM code (for example, RM-807), which you can find on the sticker in the battery compartment, on the side of the phone or on the box from the phone.
    6. Click on the bottom left buttonProgramming".
    7. Click "Recovery". In the window, under the inscription “Properties”, you should see information about the firmware you downloaded earlier.
    8. Click “Start".
    9. Nokia Care Suite will check the integrity of the firmware and display an error message as cannot find the phone (you didn’t connect it to the computer). The program will offer to restart the phone and show the “Retry” button.
    10. Now connect the phone to the computer.
    11. Hold down the "turn down the volume"And power key on the phone and click on the “retry”In the Nokia Care Suite window.
    12. After you feel the phone vibrate, release the volume down and power on keys and press and hold the volume up key until you see the inscription "Rebooting" in the program.
    13. After 15 seconds, you will see the Nokia logo and the program will begin flashing the phone.
    I recommend another interesting:

    If you liked it, please do not be too lazy to click “I like” or “share” or “1” a little lower, or throw a link to an article in your blog or forum. Thanks 🙂

    You can rate this article:

    You may also like